If you tow it far, just drop the rear driveshaft. For short tows, trans in gar transfer case in neutral. Dont need a heavy towbar, These jeeps are...
If I am understanding this correctly , you are talking about hte shaft coming out the rear of the transmission. Does the transfer case mate up and...
Why isnt true duals out the back possible? I had them on mine when it was a dauntless and I had an aux tank under the rear for extra fuel. Mine...
I twisted my driveshafts up a few times with the 355 and the t18 and alot of abuse. I got some heavy duty custom built shafts installed and...
Nope wont fit.
I did a spring over on my 67. i recommend it but build a traction aid to help with spring wrap.
i dont know anything about the ross steering, I did a saginaw power steering conversion right off. The S.O.A. I did works great. Dont have any...
Definately sounds like a spring/rear axle issue. Mine did the same thing until I changed the rear springs and found a broken spring but I havs a...
Sounds like a missing thrust washer. Without it the intermediated gear would grind against the case. Gotts open it up and check it out.
Well you need the frame mounts for the motor and motor mounts. I am currently swapping in a 360 in a 83 cj7 and this is the only thing we needed...
I would start with a fan shroud. Without one of these there is no way to direct air thru the radiator. Would draw air from above/under the...
Arent the U joints the weak link here? If you twisted up the rear driveshaft, I would suspect some previos damage the was undetected that finally...
No I have a complete 20, Just the offset rear diff kinda ruins that. i am keeping it till I find a centered rear diff. But for mow I need my dana...
$1 dollar. Let me know if you want me to pick it up, or if you will deliver it for that price!
I dont know. I know when I told the guy I had a shifter bolt with a threaded portion only by the head, and the rest of the bolt was a smooth shaft...
Separate names with a comma.
