Gotcha. Thats the one I mean, so thank you very much. Any other parts that are associated with the pilot bearing that I will need? Also, for a...
Finally getting around to finishing this project. Anyone know offhand which input shaft bearing I need to match the Buick 225 to the sm465...
Does anyone have any experience with changing the tips on the rockers on the 225? I have the early Buick 225 with the rockers on arms, and one...
Well, for those of you who are interested, I checked the pushrod length by using the Felt tip pen technique. The results show that the pushrods...
Thanks for all of the info. And my question is still based on this answer: "I also had an early 225 and it had shorter pushrods as...
So, if the pushrod difference is one tenth of one inch, do you think I can use the longer ones without issue?
Ok guys, received the pushrods from Summit today, and guess what. They are too long. Looks like the ones in my motor are 8.594, and the Summit...
I purchased a replacement motor for my CJ2A which currently has a Buick 225. The existing motor and the replacement motor are identical with the...
Last question. I ordered the part 7869-12 which are 8.686 long. But as another member pointed out, TAP sells pushrods for a 1964 225 which are...
Thanks. Made an order from Summit Racing tonight for the part number 7869-12. The length seems to be more in line with the existing ones, and I...
Thanks. The larger of the two shown in the photo is the photo is the one I purchased, and the diameter of it is .313, while 5/16 is .3125. So I...
http://s840.photobucket.com/albums/zz330/tthstrm179/Pushrods/ Oops..here is the link to the photos.
I recently created a post regarding a 225 odd fire I picked up as a replacement motor for my CJ2A. Although I purchased the motor as a rebuilt...
Separate names with a comma.