Thanks all 4 the advise;I was able 2 afford a new mc;I don't hav a vise,so will try 2 clean/hone wc's still mounted 2 bckng plates.Got some...
Hi getting ready to work on the brakes;stock 9"; will be replacing the MC,and honing the wheel cyl's (hav kits 4 wc's) yes,I should repl all with...
Thanks for the info;jeep has been sitting for about 3 yrs,on and off. Just trying to repair the things I can;I have the time(un employed right...
Looking for guidence/procedure,on master cyl rebuild. Will prob repl.at some time;but for now,I have rebuild kits 4 mstr and wheel cyl's.Harbor...
A little far from you,looks like you're in TX; I currently live just East of Phoenix,AZ( town called Gilbert) I'm not a welder;I hav an oxy/acet...
Hi Still putzing on my 60 cj5 ;all stock. Hav a couple questions, on spare tire bracket I hav 2 bolts ( diagonally from each other) holding...
Thanks for all the input; got the last one done today;went to harbor freight,intent on buying a cheap 3 lb sledge to give me some more umph! in...
Thanks for the advise; I don't hav jack stands,just a couple short pieces of 5x6,8 or so 4x4's. I worked part of the day on the L rear;now just...
Been trying to repl. spring bushings on my 60 cj5.Spent all of yesterday with the front ones;ended up torching out the metal insert.Then couldn't...
Just bit the bullet,and bought grade 8 bolts,nuts; Just curious,has anyone had any luck in taking down spring end from shackles,to repl.bushings...
Thx for input;I'll go with the 8's. It's a pain to repl. bushings,and get the spring end aligned up with shackle;as I don't really want to take...
Separate names with a comma.