1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

colojeepguy's Recent Activity

  1. colojeepguy liked Howard Eisenhauer's post in the thread Willys Koenig Pto.

    Yup. There's a hole in the bumper for a crank handle that connects to the engine crankshaft nut to hand start the engine. Ramsey also...

    upload_2025-1-23_16-2-35.png Jan 23, 2025 at 5:18 PM

  2. colojeepguy replied to the thread Willys Koenig Pto.

    More like infinitely variable speed. Or at least, idle to max RPM. Is the crankshaft on a 4 cyl Jeep low enough to go under the...

    Jan 23, 2025 at 2:03 PM

  3. colojeepguy liked Fireball's post in the thread 1963 Us Navy Dj-3a.

    Pedal arm clamped in the vise next to a straight edge. After the new bends, the top end still needs to be 1-1/4" from the straight...

    Jan 22, 2025 at 9:47 PM

  4. colojeepguy liked 53A1's post in the thread Junkyard Project - Part 2.

    Cleaning the sludge off the front differential I found this. No wonder single wheel wouldn't spin when I pulled the tire. Checked the...

    20250104_164348.jpg Jan 22, 2025 at 9:41 PM
Show older items
New Posts