Locker ID

I'm trying to sell this, and all I have is an invoice from the previous owner, showing that a limited slip was installed in the rear axle, and a locker in the front axle. Can anyone ID these from the pics? They are both Dana 44 axles from a 1970's Wagoneer. 4.72 gears.

http://s474.photobucket.com/albums/rr107/curtcanada/Monster%20Misc%20Pics/

Thank you in advance.

 

Looks like a loc-right to me.

 

Rear is a Dana Powerlok. Not sure on the front, got some fansy big springs inside that thing???

 

Front could be a Mini Spool. Definitely not a Lock Right and doesn't look like any Aussie I've seen. You should be able to see where the teeth mesh on the Lock Right or Aussie.
The rear is definitely a Powerlock as mentioned. It's not a locker, it's a limited slip. One of the best built IMHO.
Are you sure they aren't 4.27 gears instead of 4.72 gears?

 

Not a mini-spool, concur that it's not a Lock-Right (I installed my D30 Lock Right). A spool wouldn't have springs and they're a one-piece affair. This looks like it has multiple pieces. A Lock Right doesn't have big orange exposed springs. It's some kind of locker similar in function to a Lock-Right but not the same brand.

 

Maybe one of those ez locs or whatever it was called that was like a loc-right but the teeth were finer and wasn't it even built by the same company that builds loc-rights. I don't think it is an Aussie locker either but I could be wrong.

 

Not an Aussie Locker either. I just bought one for my D44 and it looks just like a Lock-Right, with the teeth visible and small springs. I've never seen any like the one in the pic.

 

Thank you for all the input so far!!!


Has anybody installed a Yukon/Spartan? Mine looks similar to this one...There was a good write up in JP magazine that I saw praising it. The rear LSD looks like the Yukon/Spartan brand also (of coarse these all kind of looked alike in the first place. Anyone have first of second hand info on this brand?

http://www.oconeeoffroad.com/servlet/the-24282/Spartan-Locker-for-Dana/Detail

I'm going to pull them out into the sunlight tomorrow, and look for numbers. I'll post more pics/info if I find anything.

 

Mini spools replace the stock pinion and side gears but use the stock differential case and are multiple pieces. A full spool indeed is one solid piece.

 

Spartan locker is a copy of the Lockright/Aussie locker. If you look you can see the teeth exposed which you can't on the one you showed a pic of. I haven't used one so can't comment on quality.

 

Rear definitely a PowerLock as noted above. The front is some sort of Lunchbox Locker, but I have not been able to find any pics of something like it. Doesn't appear to be a LockRight, PowerTrax, Detroit EZ Locker, an Aussie Locker, QuickLok.

Remembered this from my Z car research years ago. Appears to be a Phatom Grip best I can tell. Although not exactly and they don't show a Dana 30 application on the one site I found.

 

Could be a Detroit E-Z Locker, thats what Im running but it's been so long since I put them in I forget what they look like other that they are similar to the Loc-Rites. Could also be a Yukon.

 

I googled images for all of them, and non of them have the same side profile or large, colored springs that his pic has. The mystery continues!