Adding roll cages to CJ's with half cabs

Anyone have any exp fabricating roll cages that integrate the CJ6 half cab? I was curious if a good looking practical way exists to incorporate the two.

 

I have a 5 with a half cab and hope to do a truck style cage with a hoop by the windshield and another one inside the back of the cab tied together at top and low on the sides.

 

Might be able to use some clamps like this to be able to pass it though the top and still be able to remove the top if need be.

http://www.pirate4x4.com/forum/showthread.php?t=618480

 

I'm leaning towards building one on the inside of the cab leaving just enough space between it and the back section to pass the cab thru/over and just have it in two sections.

 

only thing with that is it may look a little odd without the top on having two hoops there side be side.

 

True I'm might just look a little closer at modifying the metal half cab wrangler style.

 

I was thinking of fabricating a simalr pass thru seen in this picture. it does look like the top section of the roll bar is removable though.

 

Jim, leave the fence stuff for fences. Here's what you want:

http://polyperformance.com/shop/product.php?productid=66&cat=58&page=1

or the less expensive alternative:

http://polyperformance.com/shop/product.php?productid=236&cat=58&page=1

 

Might try something like this, made for frame mounting but same idea passing thru the cab.

http://polyperformance.com/shop/product.php?productid=433&cat=105&page=1