1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Yj Spring Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by cayenne, Nov 22, 2019.

  1. Dec 2, 2019
    cayenne

    cayenne Member

    central Texas
    Joined:
    Dec 24, 2006
    Messages:
    83
    NorCal - I looked on the shocks and boxes and couldn't see a "this side up" instruction. That being said, I do have the rear shocks the other way.
    I assume you just welded a new stud on the plate after you cut it off flush? It didn't look like there would be much thread left for the bolt that goes through the eye to secure it after you made that cut? Did you keep the stock shock mount on the frame?

    Thanks for the info!
     
  2. Dec 2, 2019
    Norcal69

    Norcal69 Out of the box thinker 2019 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    1,264
    On Steve's there was plenty of thread left in the bung that's welded to the U bold plate. You only need 1/2" of deep of thread for a 1/2" bolt.
     

Share This Page

New Posts