1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 Power Steering Bracket

Discussion in 'Early CJ5 and CJ6 Tech' started by 458soco, Dec 2, 2019 at 11:08 AM.

  1. Dec 2, 2019 at 11:08 AM
    458soco

    458soco Sponsor Sponsor

    North Georgia
    Joined:
    Jan 29, 2014
    Messages:
    180
    I know its been gone over a lot but I couldn't find a thread with this particular bracket. I bought this engine this weekend just for the bracket, the guy said it was out of a 1982 regal. I'm assuming it will work, is there any reason it won't? Also will I need the crank pulley?

    Here's the bracket bolted to my engine.
     
    Buildflycrash likes this.
  2. Dec 2, 2019 at 11:36 AM
    Twin2

    Twin2 wasn't me Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    3,900
    it's missing the front bracket
    usually it stays with the pump . because pulley has to be removed to get it
    most guys that use that bracket engine mount . cut off the air pump horns
    crank pulley only if your on 225 isn't two groove
     
  3. Dec 2, 2019 at 12:32 PM
    458soco

    458soco Sponsor Sponsor

    North Georgia
    Joined:
    Jan 29, 2014
    Messages:
    180
    So i'm missing another part of the bracket...
     
  4. Dec 2, 2019 at 6:58 PM
    Twin2

    Twin2 wasn't me Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    3,900

    PS BRK - Copy.JPG
    this is what it looks like
     
  5. Dec 2, 2019 at 10:11 PM
    458soco

    458soco Sponsor Sponsor

    North Georgia
    Joined:
    Jan 29, 2014
    Messages:
    180
    I’ve been in contact with the guy I bought it from and he says he’s still got it. Hopefully make it over there this week to pick it up.
     
    47v6 and jpflat2a like this.

Share This Page

New Posts