1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

t98

Discussion in 'Early CJ5 and CJ6 Tech' started by 1a83m, Jul 9, 2007.

  1. Jul 9, 2007
    1a83m

    1a83m New Member

    Massachusetts
    Joined:
    Mar 23, 2006
    Messages:
    24
    Hi I've been looking for a front bearing retainer for a T98 for over 2 yrs with no luck. So i have decided to make one . Does anyone have pictures & dimensions for a T98 front bearing retainer to fit a f134? Thanks
     
  2. Jul 10, 2007
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Yep I have one , I can measure it tommrow for you. Lets see if I can dig up a pic for you, and no mine isnt for sale R)
    [​IMG]
     
  3. Jul 11, 2007
    timgr

    timgr Eppur si muove. 2020 Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    21,698
    Just curious - I presume that this retainer, the plate adapter and the input shaft are all the parts you need to make a T-98 fit up to a 134?
     
  4. Jul 11, 2007
    Don X

    Don X President for Life Staff Member 2020 Sponsor

    San Diego,...
    Joined:
    Mar 30, 2007
    Messages:
    2,947
    I was talking to my local parts source and he said he might be able to locate the part. I'll pm his contact info
     
  5. Jul 11, 2007
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    I think the last batch of them were made from unobtainium, and are getting mighty scarce.
     
  6. Jul 14, 2007
    1a83m

    1a83m New Member

    Massachusetts
    Joined:
    Mar 23, 2006
    Messages:
    24
    Hi Thanks hawk nice pic thats the one. If you could give me as many dimensions as possible I would appreciate it.
    Timgr those are the parts needed,I have all but the retainer, you also need the adapter for the tcase and a hole lot of other stuff.
     
  7. Jul 14, 2007
    DanStew

    DanStew Incorrigible. Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,280
    fortunately the rear adapter is nothing more than a t98/t18 adapter you can get those from novak. The front adapter is not thathard to make, but the input shaft and bearing retainer is the hard ones to locate. I know I gave Nicmil my t98 input shaft so his buddys could try and maybe make em, if so that would be awesome :)
     
  8. Jul 16, 2007
    1a83m

    1a83m New Member

    Massachusetts
    Joined:
    Mar 23, 2006
    Messages:
    24
    DonX , I've been trying to call the # you gave me and all it does is ring could you check it and send it to me again thanks
     
  9. Jul 16, 2007
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,132
    What about borrowing it to make a pattern from?
     
  10. Jul 17, 2007
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Its on the tranny now in the basement waiting for me to rebuild a Tcase to go behind it so I can do the swap right.Mcuff if you want to take a look at it I can set something up .

    Sorry I meant to get the measurements the other day and forgot , Ill get on it.
     
  11. Jul 19, 2007
    1a83m

    1a83m New Member

    Massachusetts
    Joined:
    Mar 23, 2006
    Messages:
    24
    Hi one more ? I have 2 imput shafts one is 1 and 1/8 10 spline, the other 15/16 ,10 spline which one do I use for the F134? Thanks
     
  12. Jul 19, 2007
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    The 15/16 should be the right one ,total length should be 10.375 " , shaft lentgh of 7.25 not inclueding the pilot bering pin, PN 912361

    Sorry about not getting those measurements I had several projects come up and with work I just havnt felt like going down stairs and taking the bearing retainer off of the tranny and measuring it yet.Hopfully I can get it done over the week end.
     

Share This Page

New Posts