Pics of passenger seat hold-down bracket installed?

Anybody have a photo of how a M38A1 hold down looks???-------the seat part.

Thanks,

 

"Holdowns?? We don't need no steenkin' holdowns!"

I doubt they had one stock. Neither did early CJs.
My M38A1-C has a hardware-store door bolt mounted to the floor, that hooks and holds the base of the rear seat leg. It works. I always figured it was 'aftermarket."

 

Well, I think this is for the seat latch---------looks like a place for a rubber bumper, and a rectangular hole for the latch hook?????

 

Not my jeep, but this is the kind of thing my '52 military has, as I mentioned above.

http://wilfreeman.files.wordpress.com/2012/07/2012-07-25-17-24-42.jpg?w=568&h=427

 

Just looked again, the M38A1 bolt seems to be factory riveted, despite my earlier guess that they had none. It is exact same place as the one in the picture I linked.

Mike S.... "looks like a place for a rubber bumper, and a rectangular hole for the latch hook?????'
Nothing like that in my M38A1. The passenger seat only has one rear leg, on the inner side. On the outer side, the lower seat-back horizontal registers against the wheel arch, in the angle of it's front face.

My 57 CJ5 has a seat rest bolted to the wheel arch, but it looks nothing like your picture, and there is no latch.