1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Monarch Hy-lo Jack Pump

Discussion in 'Early Jeep Restoration and Research' started by plastikosmd, Sep 14, 2019.

  1. Sep 14, 2019
    plastikosmd

    plastikosmd New Member

    Southern New England
    Joined:
    Feb 10, 2019
    Messages:
    10
    For my new Stratton project I have the crank driven pump but looking at my set up I may want to install my monarch pump to start

    From farmjeep site
    Monarch HY-LO-JACK – belt driven without attached reservoir, attaches to generator with strap.

    Does anybody have a picture of the set up and how this pump attaches to the generator/alternator?

    I have an unused pulley on my crankshaft
    I may run it directly off of that and fabricate up a different amount but I wanted to see how they were originally attached
     
  2. Sep 14, 2019
    PeteL

    PeteL Member Sponsor 2019 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    6,408

    As it says, rides piggy-back on the generator with a clamp-strap. Pretty simple. Nicely self contained reservoir/pump system.

    Maybe later this weekend I can dig one out and take a picture.
     
  3. Sep 14, 2019
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member Sponsor

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    5,822
    Check the grove width on that second pulley, it's probably a little narrower than the water pump/genny- this was intended to drive a governor. If it's the same width it's a dual belt pulley from a M38A1.

    Stock installation has a special 2 groove pulley on the genny driving the pump with a short belt.

    Installation requires relocating the oil filter.


     
    Last edited: Sep 14, 2019
  4. Sep 14, 2019
    plastikosmd

    plastikosmd New Member

    Southern New England
    Joined:
    Feb 10, 2019
    Messages:
    10
    Thx all
    That is what it seems, move that oil thing
    Will check belt sizes
    Thx all
     
  5. Sep 14, 2019
    PeteL

    PeteL Member Sponsor 2019 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    6,408
  6. Sep 15, 2019
    plastikosmd

    plastikosmd New Member

    Southern New England
    Joined:
    Feb 10, 2019
    Messages:
    10
    Thank u

    Mine is the hy-Lo jack (not jeep) thus it is just the pump.
    I will come up with something
     

Share This Page

New Posts