1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Making A New Door Panel For An Fc-150

Discussion in 'Jeep Truck and FC Tech' started by henry donaldson, Dec 29, 2019.

  1. Dec 29, 2019
    henry donaldson

    henry donaldson New Member

    florida
    Joined:
    Dec 23, 2019
    Messages:
    24
    DSCN0800.JPG DSCN0806.JPG DSCN0808.JPG DSCN0809.JPG
    Thought I'd show how I made door panels. I use regular copy paper to create a template. Way easier than trying to do it with one big sheet. Lay out as many as you can on the straight edges and use the side of a pencil to mark the radius and poke a hole where the screws and pins go. I cut the paper 1/4" undersize. I took the panel to the upholsterer that did the seats and he covered it with the same material. I also used this template method to make floor mats and trim for around the inside of the roof.
     
  2. Dec 29, 2019
    henry donaldson

    henry donaldson New Member

    florida
    Joined:
    Dec 23, 2019
    Messages:
    24
    DSCN0944.JPG DSCN0953.JPG
    Cabinet shop also did the arm rests for me. I got the black plastic push pins off of ebay. $7 for 50 delivered.
     
    jeepermc and 58 willys like this.
New Posts