1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I Hate It When I Outsmart Myself.

Discussion in 'Intermediate CJ-5 and CJ-6 Tech' started by zila, Aug 20, 2018.

  1. Aug 20, 2018
    zila

    zila I throw poop

    Rock Springs,...
    Joined:
    Oct 6, 2003
    Messages:
    911
    After adding the RR spring kit, and adding 33" tires I know have some rubbing right behind the seat.. Years ago I made a wheelhouse notch to accommodate the Corbeau seats I installed.. Today I decided to modify my wheel house notch and move that mess like 3/4" or so closer to the seat.. Now I wish I han't done such a good job. Took me yesterday afternoon and til noon today to remove all pieces. Now I am cleaning things up so I can weld it back together.. The kicker is that when I first did this I had no wire feed. So I used pop rivets and silicon. Damn I wish I knew which silicon I used cause that stuff was stuck in there..
     
    ojgrsoi likes this.

Share This Page

New Posts