1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Heater Hose Route?

Discussion in 'Early CJ5 and CJ6 Tech' started by modadds, Apr 4, 2020.

  1. Apr 4, 2020
    modadds

    modadds New Member

    Sweetwater, Texas
    Joined:
    Feb 25, 2014
    Messages:
    42
    I forgot to take pictures of the heater hose route on 61ā€™ CJ5 with a f134 when disassembling engine and removing from chassis. Does anyone have pictures or can give description on where hoses go and where The On / off valve goes between water pump and heater coil.
     
  2. Apr 4, 2020
    Jw60

    Jw60 Recovering Jeepaholic

    Sedalia MO.
    Joined:
    Oct 5, 2018
    Messages:
    497
    Here's a stock heater, don't mind the extra stuff in the 2nd pic it just shows the outlet of heater to water pump. There is a fitting on the rear of the head for the valve and hose.

    [​IMG]IMG_0082a by Joe with a jeep, on Flickr

    [​IMG]DSC01384 by Joe with a jeep, on Flickr
     
    ojgrsoi likes this.
  3. Apr 4, 2020
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,610
    Where the hose back by the firewall goes down then to the nipple on the back of the head. Can you show a closer pic of that area? Iā€™m assuming that nipple points straight up so a big loop for the hose.
     
  4. Apr 5, 2020
    Jw60

    Jw60 Recovering Jeepaholic

    Sedalia MO.
    Joined:
    Oct 5, 2018
    Messages:
    497
    On mine It had a straight open nipple going straight up. It didn't have any valve. I'm running a valve from a 89 Toyota pickup. On a earlier truck head I picked up there was the 90deg valve on the head.
     

Share This Page

New Posts