1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Crown Dual Master Cylinder

Discussion in 'Early CJ-5 and CJ-6 Tech' started by Mark Andrews, Sep 6, 2019.

  1. Sep 6, 2019
    Mark Andrews

    Mark Andrews New Member

    Pennslvaniasena
    Joined:
    Aug 24, 2017
    Messages:
    4
    On a Crown JO945556 dual master cylinder (67-70 CJ5), which port is for the front brakes, and which for the rear brakes?? Crown tech support doesn't know. "We only duplicate an original part, without knowing it specific functions". This is supposedly the duplicated Wagner-Lockheed original. Thank you.
     
  2. Sep 7, 2019
    Rick Whitson

    Rick Whitson Detroit Area Sponsor 2019 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    983
    Welcome from Michigan. You will get an answer, I believe it is the back is the front and the front is the back. I am thinking about putting one on my 64 CJ 5, bought the right bracket, from a member, but have not done the job as of yet. I want to put 11" brakes on the front first. I have all the parts probably will do the job this winter. Good Luck
     
  3. Sep 9, 2019
    jzeber

    jzeber Well-Known Member Sponsor 2019 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    2,075
    This is correct. Rear port to front brakes and front port to rear brakes.
    From a while back when I first did this conversion, post #42 on page 3. D27 Disc brake swap on my 71'
     

Share This Page

New Posts