1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone Get Sway Bar To Fit Their 27?

Discussion in 'Roxor Tech' started by justin_bongo, Sep 30, 2019.

  1. Sep 30, 2019
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
    Interested if anyone has bought a roxor sway* bar and installed it on their 27?
    Justin
     
    Last edited: Sep 30, 2019
  2. Sep 30, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    The sway bar?
     
  3. Sep 30, 2019
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
    Sorry, yes, the sway bar.
     
  4. Sep 30, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    It can likley be done, but only needed with softer YJ like springs (which the Roxor has). The stiff stock-style springs of the eCJ5s don't really require it.
     
  5. Dec 13, 2019
    mdmeltdown

    mdmeltdown Member

    Bossier City,...
    Joined:
    Feb 17, 2006
    Messages:
    792
    Wow, I haven't been on the forum in a while and this tree grew a Roxor limb. Cool stuff. I drove one when they first came out. Asked the dealer about buying parts and they were like huh?

    I am really interested in getting a sway bar for the rear axle. My springs are cj5 and they aint stiff by any means. I've got those new 1" lift springs and the ride has always had pretty bad roll. That would fix that problem. anyone have pics of how that links up and how wide those front D44 axles are?
     
  6. Dec 14, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I’d have to go measure but iirc the rear perch is wider like a 76+ CJ5. It’s the front I think people will start drooling over when it catches on.
     
  7. Dec 14, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Front axle is basically NT30 width and prepped for YJ spring swap.

    I’ll be back home next week if you still need pics
     
  8. Jul 4, 2020
    Jay's WWII Jeeps

    Jay's WWII Jeeps Member

    Napa CA
    Joined:
    Mar 14, 2018
    Messages:
    166
    I'm doing a M38 build with a Roxor 44 and sway bar. The frame horns on a CJ are higher than on a Roxor, I may have to extend the links.
    Jay
     
New Posts