1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Air Conditioning Compressor Belt Drive System

Discussion in 'Jeepster Commando and Commando Tech' started by kd6kyy, Nov 9, 2019.

  1. Nov 9, 2019
    kd6kyy

    kd6kyy New Member

    North America
    Joined:
    Aug 28, 2019
    Messages:
    3
    I have a 1970 Jeepster Commando with a 225 V6, Power Steering, and no smog pump, I am looking for a belt drive and bracket kit to install a Sanden (or any A/C compressor at this point) on this engine. I would like a serpentine but that does not look like any one makes that at this point so that may be out. I have a brochure that show A/C was available and the service manual list it but still cant find the parts, any help would be appreciated.
     
  2. Nov 9, 2019
    Jw60

    Jw60 Recovering Jeepaholic

    Sedalia MO.
    Joined:
    Oct 5, 2018
    Messages:
    329
    Take a look at buick 350 parts
     
  3. Nov 9, 2019
    bigbendhiker

    bigbendhiker New Member 2019 Sponsor

    North East Texas
    Joined:
    May 26, 2019
    Messages:
    14
    I'll be interested in what you find out. I too would like a serpentine belt setup if possible. I have spent a lot of time on the Vintage Air website looking at options. This pdf, https://www.vintageair.com/instructions_pdf/15110-VBB.pdf has info on the brackets needed to install a/c. I think their setup moves the alternator to the driver's side and the compressor gets installed where the alternator was previously. If you don't already have them you will need to obtain 3 groove alternator and crankshaft pulleys. I was able to get them on eBay. The part numbers are on the pdf linked above. They don't specifically mention the 225, but they do reference early 231's. So I'm hopeful that the info would apply to the 225.

    Regarding compressors, the factory a/c used a York compressor, but you probably are going down the right path looking at a Sanden compressor. From what I've read they're more efficient than the York. The factory a/c looks like a basic add on air unit. Vintage Air has something similar or you can design a system with custom duct work and vents. Here is a link to the section of their website with the Builder's Series. Builder Series - Vintage Air You can spend days researching all of the options. Don't ask me how I know... ;)
     
    Last edited: Nov 9, 2019
  4. Nov 16, 2019
    Keys5a

    Keys5a Sponsor Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    2,265
    The original Jeepster A/C compressor was a 2 cylinder Tecumseh/York compressor that bolted to a steel plate bracket. You might be better off looking for late-'70s/early -'80s 231 Buick for both more modern compressor and improved mounts. I've seen the compressors mounted high, on either side of the engine. I think the right (pass) side would work best. I think it will be difficult to convert to a serpentine belt on a 225.
    -Donny
     

Share This Page

New Posts