1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

62 Cj5 Four Cylinder Power Steering Conversion Help

Discussion in 'Early CJ5 and CJ6 Tech' started by 05rider, Nov 27, 2019.

  1. Nov 29, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    664
    You went to effectively crossover steering with a Ross? If so, neat setup.
     
  2. Nov 30, 2019
    Twin2

    Twin2 wasn't me 2020 Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    3,936
    did a two hole on buddy's jeep . has yet to be driven :whistle:non power
    steering linkage - Copy.jpg
    TRE aren't tight in picture
     
    Jrobz23 likes this.
  3. Nov 30, 2019
    colojeepguy

    colojeepguy Colorado Springs 2019 Sponsor

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    4,460
    When I first put my Jeep together, I used a 1 piece tie rod with the 2 hole TRE. Still had the Ross box (rebuilt). Later I swapped to a manual Saginaw setup...HUGE improvement. Later still, I went to the 2 hole knuckle...minor, but noticeable improvement. I have all the parts to make it power steering...just need the time to get it done.
     
  4. Dec 2, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    664
    I have a NT30 with a two hole knuckle and Ford Sag. I'm not some burely guy or nothing, and I don't see a need for power steering. I did them both at the same time though. It would a been nice to see how each step improved the feel.

    After 2' of snow this week.. the CJ5 is basically mothballed for the winter..
     

Share This Page

New Posts