1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1974 Cj5 Accelerator Linkage Bolt And Nut

Discussion in 'Intermediate CJ-5/6/7/8' started by The Wizard, Jun 6, 2019.

  1. Jun 6, 2019
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    158
    Can anyone tell me what size bolt and nut connects the linkage to the carburetor (232 cu in). See Jeep Parts Catalog F-74080 '74 thru '80 page Gr 4 - L 2 part numbers 4.070-6. Now on my linkage the top screw looks like it went into a threaded hole on the carburetor arm. Need to get it running before the weekend!
     
  2. Jun 8, 2019
    timgr

    timgr Eppur si muove. 2020 Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    21,241
    I don't have linkage like that to refer to, but there aren't that many sizes it could be. This will be before metric, so I'd guess 6-32 or 8-32. You can get packets of these screws at the home center and compare with your linkage to get what you need.
     
  3. Jun 10, 2019
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    158
    Thank you for the reply. As it turned out an 8-32 worked out just fine. Annotated my copy of the parts catalog with that information for future reference.
     

Share This Page

New Posts