I picked up a 1966 CJ5 with a V6 225 engine in it. By the serial number the jeep was originally a 4 cylinder model and it has a T90 transmission...
I pulled the engine out of my M38A1 to replace the rear main seal and clutch. As I was there I put new main bearings and rod bearings in it. My...
What is the diameter of the head bolts on a F-head.
Has anyone used umbrella style valve stem seals on a f head 134.
I rebuilt a YS950 side draft carburetor a the kit came with two different types of base gaskets one is a 1/4 thick and the other is about 1/16...
I have a Carter WO carb that was given to me it is been overhauled. My question is will it bolt up on my M38A1 Fhead engine.
I was given a Holley model 1904 carburetor. I know people have put on early flat fender jeeps when installing a Fhead engine. I need to know if...
I am getting ready to put my M38A1 on the road. What type on insurance is everyone using. Not the company.
I have a 1952 M38A1 jeep it has the original top bows and hardware in good shape. My question is there any way that I can put a civilian top on...
I am needing the driver side front axle for a Dana 25. For my 1952 M38A1.
I need some help with a Carter YF938. I rebuilt the carburetor. And fuel is dribbling out of the main discharge at idle. Above idle it runs great....
Does anyone has the measurements for the rear valence for a early model CJ5. Going to try to make one. Have a lot of 16ga around. Thanks
Is under seat tool box for a M38A1 the same as a tool box for a CJ2 or CJ3.
I have a 1952 M38A1 Jeep. I am having a hard time with it starting when it's cold. It has Solex carburetor on it. It has a fuel pressure regulator...
I have a M38A1 frame and running gear that is ready for a body. And yesterday I found a complete M38A1 jeep that is complete still in the 24 volt...
My M38A1 has dash lights just like a M151. My question what 12volt bulb will replace the 24 volt
I removed the steering wheel and threads on the steering shaft got messed up just on the first thread. Does anyone know what thread pitch.
I am having a hard time finding a radiator for my M38A1 that is not priced through the roof. Will a radiator for a CJ5 with a FHead work
I went today to get some parts for my M38A1. If found a place up in north Ga. The place is called Quarter Ton Military.. Good people and good...
When did Jeep delete the under seat tool box from the CJ series.
Separate names with a comma.