Ok i checked it out... when the engine is cold it reads 70 psi and after its in working temp it get around 55 psi...
Oh ok... Any idea what should i chack? Im using 10w40 btw... I will also chack with another guage just to make sure the reading is right. What...
I dont want to bypass it, i want to make sure its set currently...
So no need to worry about over pressure in the crank? My oil pressure show around 70 psi now.
sorry for bumping this but i have this setup to on my 67 f134... is that the correct setup? the crank have ventilation?
well i dont have use for a vacuum, i have electric fuel pump... so my question is still do i need to hook the plugged hole to the pcv or can i...
Yes the dipstick have a vent hole on top, i installed a small air filter there. Is that enough for the crank ventilation? Or should i connect the...
hi, on my Fhead the pcv valve is bolt to the intake manifold instead on the exhausts valve cover, and it have this bulge on the top cover and i...
Hi, are those should be connected to each other..? https://drive.google.com/file/d/1zCFB53nEWcRWShmOPGx0SrMveUOnH7P7/view?usp=share_link [IMG] [IMG]
Separate names with a comma.