Napa had them first try: Grade 5 with the correct shoulder!
I found the L top king pin with 4 bolts and the R top Kingpin with 3 bolts and a stud. Kaiser Willy Jeep lists the stud, and the description says...
With POR 15 one needs to spray an overcoat. Enamel would be good. Maybe the top spray needs to be refreshed once every 10 years? Sorry if I'm...
Ha! I found one. https://www.willysjeepparts.com/T90_Gearshift_Lever_And_Parts.htm Part# 642759-R Plug, Interlock Plunger Hole The elongated...
Hi All, It's been awhile since I have posted. I am looking for a source to buy a specific part that fits into the T86 Shift Tower. There's a...
One last thing to mention in this thread. When I bolted the transmission to the adapter (on the engine), the transmission would still not go all...
timgr: I believe that the possessive is "its", and that the contraction is "it's" (it is), i.e. It's a beautiful day in the Jeeper-hood!
That Old Red thread is the gravy! Thanks!
I do not know the answer to that question, since I am brand new to this drivetrain. The transmission in my CJ appears "new". That is to say that...
Yep, that's what I am going to go with. Tip 'o my hat sir.
You are so right! The journals are shared on the '77 crankshaft in my 225. Duh. I apologize for being a rookie with this drivetrain, but I hope...
I measured the T86 shaft tip with a dial caliper, not a micrometer so I will double check that measurement. I also appreciate the part numbers....
Killing those Commies for US Mommies. That was the mission.
Hi and thanks for your replies. I failed to remember that when I cracked my 225 odd fire open, I found that the crankshaft casting number was from...
Thanks. I looked up the GM part number and they don't provide the OD and ID measurements. Edit addition: I found the measurements for GM part...
Interesting and good to know. Thank you!
The wall of the bearing in the photo looks thin, but photos can be inaccurate. I don't see the OD or ID measurement on Summit's page. I am going...
Sorry for the late reply. Yes, T86AA.
Getta loada this!
Hi, I am having trouble finding the correct pilot bearing for the V6 Dauntless engine with the T86A transmission. The bearing listed at O'Reilly...
Separate names with a comma.