1 by patrickjane posted Nov 26, 2022 at 1:14 PM 0 by patrickjane posted Nov 26, 2022 at 1:14 PM
Hey folks, Could use some help from someone more knowledgeable. I swapped my rochester varajet out with a new one and ran into a couple issues....
Hey all, I've been researching for months and still can't figure out this problem. If someone could just take a picture it would be a huge help. I...
Thanks guys
Have a 81' CJ-5, iron duke 4 cyl and I set the air cleaner on the carburetor but can't find my wing nuts to screw it on. Anyone know where I can...
Something like Do you think you could link the spring that I need? Or at least what it looks like. I’m seeing so many different types on...
I looked all over my slave cylinder for somewhere to put the other end of a spring and couldn't find anything so I guess I'll have to keep researching
My bad so the push rod sets in the throwout arm, and the throwout arm is supposed to attach via spring to the inside of the bellhousing to keep...
Okay so I replaced the clutch master cylinder, slave cylinder and hydraulic line. I ran into a problem during installation. The clutch plate that...
Thanks all, will update when I get those replaced.
I can press down to the floor and it will return to it's original position (I believe because of a spring attached to it's mechanism) but pushing...
That sounds about right, and with their not being the proper pressure to move the slave and push the plate, would that also be why my pedal has no...
I have a PDF of the 81' TSM I've been using. I tried to bleed the system initially but I was doing it for about an hour and couldn't make any...
That's what I was thinking, I'll be swapping in a new LUK master and slave this weekend, new clutch hydraulic line as well. Apart from taking off...
Definitely possible. I've never swapped a clutch so that'll be interesting if it's the case. But what I don't understand is the push rod doesn't...
I've got an 81' CJ5 and I'm trying to figure out this issue with the clutch. Note that until now the Jeep has been sitting for 6-7 years. When I...
Update: I ordered some online but the few results I found indicated 5/16 × 18 threaded bolt 3/4" in length
Hello, I'm piecing together my 81' CJ-5. Bought a windshield frame with glass already in off craigslist that came with the hinges with mirrors on...
Separate names with a comma.