I measured up the parts Friday. Soon as the sheet metal comes in I will start forming. I will post some pictures as I get these sides made up.
So the sides of the Meyers top are steel. The doors, top and rear gate are aluminum. With the steel being rusted out in some spots and channels...
On this jeep there was no hardtop with it when I bought it but you would think that it must have at some time with all the different holes in the...
After messing with it last night I think this is what I am going to have to go with. I think the reason the backside of the hinge returns is to...
I will do that and see how well it fits if I just push it up as tight as the hinge will allow with me adjust the window angle to see what seems to...
You could be right as well. I though of that. This is where photo's of the real deal installed on another Jeep would clear up all confusion.
You might be right. There is a slotted track on the window frame. You can just see a piece of it in the picture. That is holding me back for...
When I hold that up to the jeep the hinge looks like it could go on the inner lip of the body but that seams to push the door back to far. Where...
Now that I have the body temporarily mounted in place I have gotten sidetracked on another task. A buddy put the bug in my ear on installing...
I wasn't sure on the floor panel from my original floor if the blank off panel was correct or not. There were so many patches on the floor and...
I like the idea of elevator bolts. I checked and McMaster Carr has them available. I should be able to get started on the layout of the holes...
Thanks for the very helpful information. My thought process was moving along those lines but I really wanted to hear from someone who had...
I didn't realize the pdf pictures were not going to show so I will try this as a jpeg instead. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Hi, I am finally getting to the point of wrapping up this project I started 4 years ago. I have taken every nut and bolt apart and rebuilt...
Separate names with a comma.