This site has a bunch of great articles about electrical stuff. http://www.madelectrical.com/
Yes I got it fixed. I just bent the bar some more to fit over the valve cover and also bent the plate on the carb that it connects to. It now...
I’m going to take the cover off and look at what I have. I’ll make a decision from there
I just watched metalshapers video about installing the rear bearings and he mentioned the thrust block. Looks like I’m going to take apart the...
Sorry, tapered axle and no C clip in the diff. I’m wondering if something is missing in the diff. About 10 years ago, it seized up and we had to...
I have ones like that and will post some pictures. I had a pair and they failed after about 7 or 8 years and just bought another pair. Will see if...
I had a major rear axle bearing issue. Both sides fell apart. I removed both axles and pressed, what was left of the old bearings, and pressed the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Here are some pics of my setup and you can see where it’s hitting the valve cover. I’m thinking as I...
I'm looking for some good pictures of the linkage for the throttle. I really need the parts from the head and the rod across the head and the...
Has anyone thought of switching the rear gas tank around so the fill was on the drivers side. I’m adding one to my 63 CJ5 and was thinking of...
Here are a few pictures of my old pulley and the new pulley I bought. The new pulley is definitely the correct one. That bigger pulley is what was...
Thanks how had I not looked at that page before. That’s what I have been looking for.
Didn't Advance Adapters make a hanging pedal assembly for Jeeps. I don't see it on their website. Maybe it was someone else, but I thought it was...
I have a 225 V6 freshly rebuilt. It was painted after the rebuild. It looks great. The exhaust manifold surface on the block was painted also....
Yes you are correct and I had it backwards. The pulley I bought was smaller which would speed it up. I had that right just write it wrong
I purchased what I thought was a crank pulley from a gentleman here but it ended up being the water pump pulley. The only thing, it is larger then...
Perfect, I'm going with the bushing. Was going to anyway, but wanted to check what others thoughts were.
What is everyone's thoughts on using the bronze bushing or using a bearing. I look on Rockauto to find part numbers and what is possibly...
Sounds great. Now you just need to reproduce those so I can buy one. Wanting to get a sniper for my rebuild. Something else I came across, has...
Got it off an sent in the mail to get it restored
Separate names with a comma.