The chevy v8 bell is not the same bolt pattern as the buick 225/231. I simply used a buick bell housing then mounted the sm465. Novak adapter for...
I put an HEI in it last year. Have noticed that it doesnt like to start when hot. Thought it was a fuel flooding thing because it started better...
Checked the grounds. Front markers come on. I too am now looking at the switch. This current headlight switch is only about a year and a half old,...
marker/turn signals work. Front and rear
Here is the skinny, I put LED tail lights in my 70 CJ5. Upgraded the blinker switches to electric because the old thermal ones wouldnt blink the...
Got mine last year at a local Parts Plus, for less than $100.00.
Last spring I bought an HEI odd fire distributor at a local Parts Plus for less than $100 complete. Took a bit and and some help from from a...
When you look into the cap and the contacts are longer in the sweep to offset the timing swing, then you are looking in the right direction.
My tag on the firewall says 1970 Kaiser. It came with a rear tank. Toledo Ohio. D27/D44 flanged rear, 225 V6 SM465 with twin stick D18 and tera...
I have a 70 CJ5 with OEM rear tank. Firewall tag says Kaiser Jeep Toledo. So Kaiser still had the Jeep throught the model year 1970
I currently have a Holley 390 with a Holley manifold and I am wanting to ditch the Holley carb., keeping the manifold. Looking for a 2bbl...
33x12.5x15 BFG Mud Terrain TA KM2, like them so far. I have BFG for over 15 years with out any problems that were not caused by me. Good tread...
Mine looks looks like this one, so Jeep never put another type on a CJ5?
I currently have a 70 CJ5 with a tailgate that needs to be replaced, no problem, right. Well I put an add out for a tailgate and a guy responded,...
I have a 70 CJ5 I picked up a year ago with a wonderful hack job on the floor to fit an SM465, I need to cover it up. I have a D18 twin stick in...
I got a 70 CJ5 with a dauntless odd fire with 4:88's. However I also have a SM465 and in 3rd I can do better than 30mph, 4th I can easily get...
I just bought one 2 weeks ago. Had to have one made, because I wanted a three finger clutch and not a diaphram. Got in made at Commercial Brake...
Separate names with a comma.