I went for about a 60 Mile round trip ride. I think we're just about done here. Still finishing the upholstery for the second seat. Fine tuning...
I'm interested! PM me a price if you're serious about selling it!
Thanks! I did keep the PTO. Trying to figure out how it goes back on at the moment... But I agree, it should be fun when it's back on. This...
A breakthrough. I was never able to get the engine to start up, and had some very loud gunshot backfires. The timing was definitely off. I was...
Got the new fuel pump primed & installed. Re-installed the oil pan (could never see the cam gear). I ended up using a small magnet to get any...
Good looking jeep. I think your restoration path depends on what you want out of it. If you plan on redoing brake lines, fuel lines, & other...
Question: Is it easy to inspect that CAM gear while the oil pan is off? When I look up into the engine compartment, I can't see it.
Well, I've been trying to get her started the past couple days with no luck. Coil was getting 12v & showed good resistance. Wires were good, etc....
Back to work on a few more items. I got the cheese board dash cleaned up, wired the engine, put in the fuel tank, ran the fuel lines, installed...
The replacement metal from classicent has been absolutely great. The pieces were a perfect fit, and really helped bring this thing back to life.
[IMG] [IMG] [IMG] [IMG]
[IMG] [IMG] [IMG]
The body is back on the frame!!! I sealed all of the seams on the under side with a silicone sealant, and then prepped for a coat of monstaliner....
More progress pics. All of the final pieces of metal have arrived. I've sanded, primed, and welded most into place. Pics show finished tailgate,...
Body Work Progress Only posting pics at this point. It gets redundant. Cut, fill, weld, grind, repeat. [IMG] [IMG] [IMG] [IMG]...
More progress. Finished one side, and began stripping the other. [IMG] [IMG]
Progress is progress, and I like sharing pictures. Here is some more body work. Welds smoothed out, crossbeam welded in place, some epoxy, and a...
Continued working on the panels. I've never done body work before, but they're getting easier and of higher quality with each patch I do....
It's been a long time coming, but I haven't given up. I'm starting the body work. Most of the insides are going to be scrapped, and a lot of...
Okay, so I'm back from school for the summer, and progress has been made. Last summer I had the wheels sandblasted and powdercoated. I got new...
Separate names with a comma.