What year did the rear axle spline count change from 10 to 19? I was going get a locker but don't want to end up with something that will not...
Does any one have a copy of the twinstick or t18 information from the Willystech web site? I haven't been able to get the web site to open for...
I have several questions about going from a t86 to a t90. I want to but it in place of a t86 behind my V6. Not many T86s around for parts and...
This wasn't completly a barn find but close. The original engine is still in the barn but the Jeep was sitting next to the grainery. I'll get pics...
Any one know what size socket I need to remove the rear pinion nut? Its on a 1970 dana 44 with the flanged axle. I know its bigger than 1 1/8 but...
If you was going to bring a spare front axle shaft would it be the long or short side? Also how does every one carry their high lift jack? I'm...
I have a 1964 and 1970 cj5. Can the flanged axles from the 1970 parts jeep be swapped into the 64? They have different gear ratios or I would have...
I have a 225 with a t86 and want to mate it to a dana 20. The dana 20 originally had a t150 mated to it with a 26 tooth output gear. Can I steal...
Here is the deal. I have three CJ5s and need to get it down to one that I can use as a daily driver by fall next year. I don't have a heated or...
I have found me a dana 30 open knuckle front end from a 1977 with disc brakes cheap. But it is missing the hubs. Can I pull the stub axles and...
I converted over to a 3 wire GM alternator with a voltage gauge. But I can't seem to get the amp light to work. Can someone provide me with a...
I found a Dana 30 from a 1987 CJ7 with disc brakes. It has the same gear ratio as my rear axle. Is this a good canidate for swapping in the...
Does anyone have a diagram of the vacume lines for the windshield wipers? I'm running a :v6: and M38A1 windshield frame with the wipers from the...
Any suggestions on how to remove the exhaust manifold bolts with out breaking them? I have a cracked manifold and want to replace it. I'm guessing...
Did I go wrong I paid $350 for the white 70 and I'm still working the deal on the red 66. They both run. Both have rust. The 1970 has a Ramsey...
I have a 1966 and a 1970 cj5. Garage space is limited or it is out side in the rain. Neither body is great but I can only keep one so I want the...
What is a used Offenhauser 4bbl intake for a 225 worth? I found one today but the guy won't give me a price and told me to make him an offer. Any...
I have found a 1982 CJ5 hardtop what all do I have to change to make it fit my 1965 CJ5? Thanks Lenard
Separate names with a comma.