Hey All. Well I did a search but the bubble issue was only a side part of a past post. So I have a F 134. I just fired her up and noticed bubbles...
So... PO must have put thread locker on the wheel stop - left side Dana 30 - disk break set up. Broke bolt off. heated it, soaked PB Blaster etc....
Hi All, I have been scrubbing away at these and wanted to find out if they are in usable shape. The spindle to the far left is off of a drum set...
Hey guys, can anyone guess what year these are? The diamond stamp on the arm has me curious. Thanks!!
Hey Guys, Attached is the 2 hole knuckle I inherited with my new Dana 30 I want to refurbish. What do you think? I am planning on a tie rod flip...
hey guys. I have looked around this site but many of older posts have photos that r missing. Anyway, can you guys tell me what this axle is? Thank...
hey guys. Wasn’t sure if this was the place to post but I found a fix that might help someone. So my key was hard to turn to the point that I was...
Ok, sorry for the post but I cant find the exact answer to this. I want to go with a simple one tie rod conversion on my 66. I bought the beefier...
So, I thought about finding a Dana 30 from 72-76 that has 11" brakes as a bolt on upgrade to my Dana 27 9" brakes BUT my rear Dana 44 is at 5:38....
Hi All, As if I don't have enough headaches, I am looking at some pretty cheep 19 73 Dana 30 and 44 axles for my 1966 cj5. They have drums on them...
Ok so I freely admit that the leaking of my 66 is almost like death and taxes but wanted to get some perspective on the manner. I started the jeep...
Hey All, I have learned a great deal lately about wheels - siping, tubeless, radial, ND, 4 1/2 vs 5 etc. I am planning on replacing my 15" rims...
Hi All, I know there are lots of threads out there but has anybody used this specific conversion kit? 1941-1971 Willys Jeep CJ-2A,CJ-3A,CJ-3B,CJ-5...
Hey Folks. So I spend time keeping up with my jeep and have fun driving in the summer but it earns its stay by being able to plow. So... it sits...
Hi All, I need some confirmation before I go ahead and attempt to replace these springs. What dimension do you have on your Jeep(s). The FMS has...
Hi All, So it seams as though the leak is coming from the lower bolts at the front of the bell housing - see photo. Is this something I can fix or...
Hi All, So I am hell bent on tracking down the few couple of leaks I have in my 66 cj (I know probably a fools errand). Anyway; I cleaned off the...
Hi All, So, I did a search for non working brake light. All other lights work. So I jumped the two wires going into the Brake switch at the MC and...
Hi All, I have done a search and have learned some but have a specific 'sputtering' problem. 1966 4 134 engine. Starts with little to no choke in...
Hi All, I did a search but came up with lots of un yielding results. I got the old shackle bolts and rubber bushings out off the rear hanger. The...
Separate names with a comma.