That's what I was looking for, Thanks guys! Sorry for the lack of information, it is for a 1971 225. Chip.
Dose anyone know where I can get a replacement coil for my CRT HEI Distributor? Their website doesn't show anything and they don't answer their...
Hi- Could you tell me what Chevrolet vehicle the reservoir came out of? I have the same MC and use a plastic remote reservoir mounted off the side...
I think I have the same Flowmasters, I will take your pictures with me to the muffler shop and route mine the same way. Thanks for your help. Chip.
Ron- This is exactly what I was looking for, is it the same on the passenger side? what type of mufflers or you running and do you like them? Chip.
Agreed, I should have gone that route 30 plus years ago when I restored it. The good news is it has never once given me any problems so I am...
What is the best locker option for the 1971 Dana 27 front axle? I see Power Tracks makes one but for years up to 1970, what changed in 1971?....
Same Shocks, I didn't change them, ended up with clearance with the offset tie rod setup, still close and might still move the upper mounts before...
Looks good James, nice work! Chip.
That is awesome, I was hoping for something less custom and more muffler shop:).
you are correct, steering stabilizers should be band-aids, custom early CJ5 front ends are a different animal and I've always ran a stabilizer on...
I am running headers, I have both right and left mufflers. Chip.
How are you guys routing your exhaust off a 225 header setup? I have mine exiting right under the seats and it’s too loud for me and I would like...
Had some time to finish up on my front end this weekend, I welded up some mounts for the steering stabilizer and added some 1” wheel spacers, just...
nickmil- The fill hole is higher than the cover I took off and I did fill the oil to the new higher level, should I pump some oil out? do you know...
Almost done, got everything back together today and took it for a ride, real nice upgrade, tracks dead on even hands off. the steering stabilizer...
Installed the Ruff Stuff Dif cover today, it is a lot beefier than I thought it was going to be, like 3/8" thick plate, really nice stuff. [ATTACH]
I used an magnetic angle finder mounted on top of the knuckle with the jeep on level ground to check the caster. When I has going through the...
I to have 32" tires and run at 25 psi with a 2" shackle and 2" spring lift and had the same type wobble issues, for me the fix was more positive...
I got this one... [ATTACH]
Separate names with a comma.