Completely stock 1974 CJ5 other than the I6 was swapped for a V6. That's kind of what I was thinking, 40 year old technology probably wouldn't...
The difference in tread height is 3mm, not 3mm remaining on the tires. I was thinking about putting the new spare on the right rear as mentioned....
I just picked up a set of slightly used 32" tires including an unused spare. I want to rotate the spare in with the used tires to wear them all...
Daryl-I've seen quite a few of your craigslists adds. You had a motor awhile back posted that was complete with exhaust and clutch that I was...
I'm coming from the Volkswagen communities where parts are everywhere. This is a lot different for me. When I built my last Beetle, I had a pick...
Thanks Timgr and Warlock, that's kind of what I was looking for. I didn't know if for some reason this motor was worth hanging on to or going to...
Hey iharding, ya its in Woodinville. I live right up the street. Curious if you have talked to the guy? I understand the difference in the...
Trying to keep this is short as possible. I have a 74 CJ5 with a 79 231 HEI swapped in it. The reason I am asking in the early cj5 tech section...
That's what I was planning on doing. I already talked to a shop who said it would be 40-60$ to put a neutral balance on it depending on how hard...
Its only on this side. The one in front of it looks like it is weeping some too. The passenger side is totally dry. She sits in a garage so I...
Got it all put back together this morning. Just replaced the thowout bearing and cleaned up the parts and called it a day. It drives but I can...
I have a 1979 Buick 231 swapped into my CJ5. I just finished the clutch. I started it and got underneath to adjust the linkage because it was...
No symptoms at all except for a slight wine from what I was assuming was the throwout bearing when letting the clutch out. It was on my to-do...
Heres the pressure plate and disc. you can see the TO bearing that disintegrated. [IMG] [IMG]
Timgr- can I clean up the friction surface on the pressure plate? Ive already had the flywheel resurfaced before I figured out pressure plates...
I will have to take some. Im impressed with the amount of time the PO took in "making" parts for this thing. Looks like I will be going to a 225...
yup, the PO pulled the cooling fan and put a little electric fan on it. I can hop down in the space between the radiator and waterpump. I...
So far Ive talked to AdvanceAdapter, Novak, TAperformance and Mcleod clutch and no one can id it. Finding more and more forums with pics of this...
TA Perormance wasnt Able To Id It Either. They Recommended Taking It To And Industrisl Clutch Facility That Rebuilds Truck Pressure Plates. Said...
Im Pretty sure Its An Even Fire Motor. I Called A Shop Today About Rebuildin The Pressure Plate And They Weren't Sure. Said They Would Call Me...
Separate names with a comma.