I need new leaf springs at stock height and was wondering if anyone has a recommendation for sourcing some. Kaiser Willys can’t give me the load...
I am wondering what the routing is for the pcv lines. With or without vacuum pump. Some valve covers had a tube and the air cleaner had a tube....
Can anyone tell me the size hole for a beehive style parking light (I think about 1 1/2”) and if possible how far below the headlight it is. P O...
RenderedContent-0306E2C1-8843-463F-B7FC-F6083E5978D1 by 59cj5 posted Jul 16, 2017 at 2:55 PMRenderedContent-0306E2C1-8843-463F-B7FC-F6083E5978D1...
I am replacing the inset tail lights the previous owner installed, with a set of Hall tail lights. I have already replaced the body panels and...
Just finished my tailgate repair and I think it turned out ok. Saved me money on a new one. [IMG] [IMG] [IMG] [IMG]
On a F-head engine, the crankcase ventilation line comes off of the valve cover and goes to a tee, one side then goes to the block by the carb...
How do you remove the transfer case shift levers with out removing the transfer case from the tranny. I have the twin sticks and I have already...
Separate names with a comma.