Anyone know a Part# Napa or someplace else or a good place to get new bushings for my springs? The springs are in decent shape but almost all...
Okay I have researced, and searched, and correct me if I am wrong here. I have heard some people say that early 231 heads will fit with no...
Okay When I rebuilt my engine I used a Delco Remi 10si to replace the orginal unit that was fried. Im looking at going to an electric fan, and...
Okay I bought a used PS pump and bracket for my 225 so I could lower the aftermarket bracket and pump lower to do my Power Brake conversion......
I am getting proper PSI from my fuel pump, But I am worried about flow. I have seen many folks that added an electric pump to the 225, but did...
Okay I have posted a lot of questions as I rebuilt my 70 Jeepster. Still have a lot of work to do as I am aiming for a "Resto Mod", but I figured...
Okay I got posts on a few other boards. I need a new stock Power Steering Bracket for the 225. I know that most 231/300 even ragl 3.8 with...
Okay along with some other issues working on, the 390 I am running on my new Offy Intake is running very rich on the passenger side. I have...
I posted this over on the Jeepster Commando Forum as well, but might get some response on the issue here too. Okay Gonna try to run this down...
Okay im over on a few other boards so so folks might have seen this already, but for those of you who have not here we go. Started out with a...
Okay so adding more to this nightmare. Dauntless engine, according to the FSM Vales should be 4.543 in length. My current valves that are too...
Okay make a long story short and my nightmare as well. I need some MAJOR tech help from someone who knows the 225 interior workings:) Master...
Separate names with a comma.