Hey guys it's been awhile but I seek some knowledge; attempting to do the unthinkable and take out a loan on a 31 year old jeep. What I know:...
hey again, more distributor fun, i picked up an HEI for my 225 off ebay and have been having some problems. this is what i bought:...
found this on ebay today: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=360250155538 i was a little put off by the odd...
A year ago when we finished refurbishing my 48' I found an old Harrison heater hidden inside the dash. I took it apart cleaned and painted it but...
i scooped up a set of york brackets that were meant to fit a buick 350 made by a company called 'mapco' (stamped on the back of the larger...
Well since this jeep has been assembled back in June it's turned close to 9000 miles since we drove cross country. It has been my daily driver...
hey everyone i have a 2a with a 225 dauntless from a 67 commando. it has the 2 barrel intake and rochester carb on it right now, and its pretty...
We are installing an offenhauser 360 4 barrel intake on a 67' 225 oddfire block. i bought the intake/carb off ebay a week ago and it was labeled...
hey guys does anyone know the exact oil capacity in quarts for the 225 v6? i was guessing about 4.5-5 quarts overall. (my dipstick is...
back with more questions for you guys. i posted a few weeks ago about the flywheel issue i had, and thanks to Seth here on the forums for taking...
hey all, i recently purchased a flywheel on ebay that was listed as coming out of a commando with the 225, being that the 225 i've got built...
hey starting to mock up my 2a with the engine on the frame and trying to line up the radiator and i've reallized the hoses dump out on the...
i've got a question. i have a T90 with the longer 6cyl input shaft on it, i'm guessing for use with the old 226 or something along those lines....
hey guys thought you'd like to see some of the buildup...it's slowly coming together the goal is to be done by august...so we'll see. check it out...
i've been doing research for the 225 swap into my cj 3a, and i've read in a couple places the ross steering might have a clearance issue when the...
so as some of you have noticed by now my frame sitting in my driveway is lacking a few parts..mainly a power plant. although it's tough starting...
this is the very begginning of a rebuild on my cj3a, entitled the roach seeing as how it housed a considerable population of the things burrowed...
starting a teardown on a 3a. it's down to frame axles and springs. suspension is heavily damaged and most should be replaced. i think the...
Separate names with a comma.