Not wider, but the CJ5 frame does not extend back far enough to mount latter model bumpers on. I had to weld two c-channels on to the frame to...
Besides money, it depends on what you want to do with your jeep. If you want to get into serious 4-wheeling, you will want the lower first gear...
Are you sure you have the correct clutch throw out bearing? If it is not the right one, it will bind on the shaft. How does the clutch work....
Thanks for the input guys. Ended up buying a rubber strap wrench I bought at Lowes to hold the pulley. Even in gear I could not keep the crank...
I am trying to install a double groove crankshaft pulley on a 1974 CJ5. The original pulley is a single groove. Any pointers on how to get the...
I stand corrected
I don't think my Dana 30 in the front would pull 44's.
I orderd some bump stops, Thanks for the tip.
So trim the fenders is what I am hearing so far, in lieu of body lift or higher lift shackles?
I currently have a CJ5 with 4" skyjacker lift and 1" lift shackles. I am running 33's. They only rub when i hit something fairly hard. I would...
Some good info. How much for the pulleys?
I am in the process of trying to convert my manual steering to power steering. I have collected various parts which include, 80's jeep alternator...
Separate names with a comma.