Thanks guys for the 4WD and grammar lessons. You have all answered my questions thoroughly...........gilly
New an F-134 puts out 72hp I believe.
Yep, I know pretty embarassing- don't want to get it dirty :?. I understand most of what is going on now and I did know the pattern already. If...
I have never used the four wheel drive on my 65 CJ5 since I bought it. I am not sure how the twin stick operates and I did a search but this...
I did do a search and some homework on the matter. Sounds like the check ball isn't seating right with varnish, dirt or whatever. Problem two is...
Well, I just poured some gas into the carb and hit the key. She instantly fired up. I will have to do a search and see if a rebuild is in order....
I am no mechanic. My jeep had been starting worse and worse over the past month. Once it does start it runs and idles great and doesn't seem to...
So, I am sleeping yesterday night and I start to hear this horn go off around 5am. It seems to be going on and off for a few seconds every once in...
Sounds like a great idea to me. If you remember I picked mine up right around the same time you got yours. I haven't messed with a manual choke on...
Well it did just as you said it would jayhawkclint. I got a spare thermostat from the previous owner and it is a 160 degree stat. We took it for a...
OK some good ideas. I will check the belt tension. I like the variable resistor idea. Would I get one from radio shack? What does the voltage...
My PO had replaced the speedo/fuel/temp gauge and ever since the temp is right on the "H" once it's warmed up. The fuel amount didn't read right...
I was in the same boat and just got done cleaning it out top to bottom. Flushed the steel mesh out and then ran kerosene throught it as...
I do like the tire/rims out further as for looks and it probably handles better. They still are well within the flares and the flares are only...
I looked closer at the studs in the backsapcers. Started to hammer on the stripped and busted ones. I thought they were not pressed but turns out...
The guy I bought the jeep from said to check the 1" backspacers periodically because they can loosen. Well, I just did and now I need new...
Yep it's the hinges that are rattling. I only mentioned the cork on the front cowl (engine area) for the hood to rest on as that is the only...
Well, I figured I would shoot the hinges with some WD40 to stop the rust. Now the darn thing rattles. It seems there is plenty of play in the...
Re: Where's My VIN? (New VIN Project, Please Help Out) Well, I guess mine would actually be 1965 model year built in Aug-Sept of 1964. It has a...
Here she is.......... [IMG]
Separate names with a comma.