Timgr, again thank you for the information and link. Looks like a great carb but a little pricey. What is he doing to make it fool proof for...
Timgr, is the OEM Motorcraft carb soemthing I can find at a salvage yard? If so, do you know what size/model motorcraft I am looking for? It...
I got to go ride for the first time saturday(never drove a 4x off road before). I had a blast and was very inpressed with the CJ5's capabilities....
I looked in my trusty vague Haynes manual trying to figure what is required to replace the rear axle seals on my 79 CJ5. Is a puller required...
Thanks for all of the positive replys. I will know what they are like in a week or so, I just ordered 4 new ones(TirePackage.com). $626.96 with...
I have a 79CJ5 304V8 that has been used and abused. I noticed yesterday the remnance of what apears to be a solid round brace between the motor...
Thanks for the info on the tires,I did not realize they were so popular, and they are also cheaper than all the other Super Swampers. I guess...
Anyone tried these? Will the 34x10.5's fit on a 2.5" lifted 79CJ5 with stock body and shackle? How bad will they rub under full compression...
Hay guys, thanks for the info. I will take the advise above and not lock the front. What is a "lunch box locker"? I have seen this mentioned...
I have a 79CJ5 that is going to be off road "only". I want to weld the spiders, what type or # rod should I use. I want to weld the rear, and...
Just installed a 2.5" lift. My shocks are a little on the short side. Does any of the Auto Zone type stores have the shocks I need? What...
I just aquired a used set of 2.5" lift springs for my CJ5. There are more springs in the stack than my factory springs and probably need to get...
Thanks for the info guys. The seat belt bolted / clamped to the roll bar is a great idea, and in my price range. I will keep an eye on my...
I have been searching here trying to educate myself about Jeeps. Great info guys. My Jeep is a 1979 CJ5, 304, not sure about trans(3 speed), it...
I just made a deal for a Jeep, I was told that it is a 1979 CJ5. When did they quit making the CJ5? It has a 304 V8, I was told. What...
Is there a specific model vehicle for doner seats for a CJ3B? Does anyone have experiance useing bench seats? Will (2) fit? What do...
Thanks for the info guyes, I have swaped out everything useing the better parts from each. The only thing left is carb, brakes, and...
If I showed pics, you all would laugh. The good 53CJ's body is rough as you could imagine, but it is complete minus seats/frames. Is is so rough...
Mcruff, it may be, it is a 3/4 ton so called heavy duty. But the shifter shows 1 thru 5, I do use 2nd to take off unless it's loaded. I just...
OK guyes, this my cheapest/quickest route to get to the trails: New carb, master cylinder, shoes, and flex brake lines. Rebuild original...
Separate names with a comma.