Last time I did a body off I replaced all of the (hat?) channels with 2X2 square stock to correct issues anyway. I would think that a very easy...
and then a few months down the road.... bend em again....
Very interesting Jeep.
Howdy from Minnesota. Looks like a fun project! I would have expected a bunch of replies telling what year it was by now. These guys on here...
When I did mine I swapped in the swing pedals out of a late CJ at the same time. Really makes the swap easy. I think my column came out of...
I run http://store.summitracing.com/partdetail.asp?autofilter=1&part=HED-99200&N=700+4294908280+4294907261+400143+115&autoview=sku (think that is...
on the late CJs the rear spring is the same length as the wrangler also isn't it? I think it is a direct swap.
If you look at my pictures you will see what happened to me. I ended up cutting the mounts back off and moving them back further. Measure 8...
Just noticed yours is an 80. The rear is a straight swap then. The fronts also except the front shackles as I recall. Someone makes a shackle...
I followed pretty closely the steps in the tech reference here. I had issues with where my steering ended up. I just moved the mount back. To...
Best thing I ever did to my 74. http://gallery.reprobation.net/v/ccarey/jeepshots/yj_spring_install/ link to 1000 words for you :)
I finally got to test my 74 CJ5 with front and rear detroits/4.56 gears. First impressions were great! I did a section of road that was snow...
I also have an 8000i hanging off the front of my jeep. I bought mine new, found it on sale for a bit over $500 with free shipping. I don't think...
Great information! I had a bookmark that I was going to add, come to find out it was the same one. I put the 12SI 94 amp unit on my plow jeep....
Before I would do all that work I would just toss in a GM tilt. I get what your saying, but wonder how close you want your wheel to the...
I am one of the guys that runs a D30 and rarely breaks anything. D30 with a detroit in front, D44 with a detroit in the rear, 4.56 gears. Works...
I have the pipe nipple already. It is 1/4 inch pipe thread as I recall. i just bought standard barbed fittings from a hardware store. On the...
Parts mike sells the kit for $200. There is an adapter between the t18 and the d20 but you have that together already. You will need the 76 up...
Now that FL1960CJ5 has brought up the subject, can some one tell me where the stock breather location is on a 1974 D30. I no gots one on mine and...
I was very concerned about body roll when I added the wrangler springs. I sourced sway bars for the front and rear as I was doing the swap. I...
Separate names with a comma.