I wonder if anyone can help with some pics of there v6? I am doing a motor swap into my cj5 and I do not know the routing of the bypass or the...
I just put rings in my f-head and it stop burning oil for about 1500 miles. It is now burning oil again so it needs a major overhaul it also has...
Ok I went digging around the back shed and found a gear type oil pump it has two small gears in it instead of the trochoidal set up. I put it in...
I did plastiguage the bearings the new bearings have less clearance than the old ones.
At 2000 rpm oil pressure starts out at about 50 psi and when it warms up it goes down to just under 20 psi. On idle it goes from 20 psi to about 5...
I really need some help I have done plenty of searches but got no real answers. I just recently put new rings and bearings in my f-head and when...
I hate to flip flop but now I am really leaning to the f-head besides I have way more 134 parts anyway. Maybe someone will come up with a way to...
I have the donor 70 sitting in the back yard I plan on using the flanged 44 when I get a locker I fugure the flange axle would be better suited...
I geuss I would be happy with about 30 more HP
Is it worth swapping in a v6. I have a 1958 cj-5 with an f-head and it also has an overdrive it seem like it would be great with a litle bit more...
I have just converted to 11" brakes and put in all new lines with a dual master cylinder. The brakes work perfect but the brake lights do not....
How strong is this front axel. I read how alot of people changing them out. I plan on running a 33 inch tire and doing some moderate trails. Will...
I currently have 9" brakes with single resivoir master cylinder. I just got a 69 cj-5 thats extremly rusty but has 10" brakes and a dual master...
I am not to familiar with the Delco alternater but a word of advice never check the the charging system by removeing the battery terminals if you...
I am fabbing up a rollcage. I was wondering between the front and rear hoop where would be a good spot to tie them in together. I got some pics of...
I have got aset of those they came out of aM38-A1 body.:)
Is there a proper mounting location for a sport bar or wherever I mount it is good.For location I mean on the fender wells towards the front or back
My old Jeep has got 5.38's and I can't wait to get an overdrive for it just got to save the money I can just imagine how it will make it so much...
Anybody ever do a fuel milege on a jeep with a warn overdrive and if so what did you get:?
I am an Electrician And a knock out punch would be perfect no distortion but remember the size on the punch is pipe size so a 4" punch is accually...
Separate names with a comma.