I have a flanged axle 44 in the Cj-3B I am working on. I will be selling the front and rear axles soon. Of course the shipping might be too...
Heated seats are the best!!!:) I can't believe noone has mentioned them. http://www.sportsimportsltd.com/afcarseathea.html
I don't have any right now as my digital camera and greasy paws don't mix well...... but I will try and get some for you. The only thing I would...
I have turned down the hubs off of a 14 bolt truck axle to allow for 5x5.5" wheels and brake rotors. Weld the 14 bolt spindles to the Dana 44...
I would build a new frame from the 2x4 box. The original frame is c-channel, and I don't think that the box-to-c joint would be worth the risk. I...
I rolled a 2A with the underseat tank when I was 16 (long ago). The windsheild frame pinned me under it while the under seat tank proceeded to...
I have always been able to just walk in and get one. You do have me concerned a bit now though. I would like to hear from someone in the parts...
Could the lines be hooked up backwards??? Front to rear lines reversed?? I have had a few new MC's that were bad from the parts store. Exchange it...
By the looks of those welds, you would have a time getting those off. I would just leave them on.
I drove my Cj-5 as a daily driver for 3 years, 31 miles each way, all freeway. It had 33x12.50's on 10"wheels.(not the best for DD's) I averaged...
You make some good points.:stout:
No jig- I just used levels and large squares to keep everything straight as possible.
HA, HA -- not as ambitious as you might think. I just couldn't see putting a ton of work into the rest of the Jeep if it had a bad frame. I have...
some more I have the intermediate crossmember in. The front and rear are held by temporary members to keep it aligned. [IMG] [IMG] [IMG]...
I am resto-modding a '57 3B that belongs to my wife. (No she is not mail order bride R) ) The frame was cracked almost all of the way through at...
Well I had to look up falderal.:oops: Next time we play scrabble I can throw that one down!! I can't prove it, but it sure seems like those that...
We used to have a local clutch reman place that would do custom clutches pretty reasonable, but they won't touch 'em any more. Good to know there...
Well my 3B was titled as a CJ-5 for years. I had to go through a bunch of paper work at the DMV to get them to title it as a CJ-3B. I could have...
Here is a very basic brief overview of what I have done. I used junkyard parts from an '85 park avenue. Had to use the 231 heads. (there is an...
I looked into doing a Quad 4 in a willys. The bellhousing was $$$$$$ and made the whole thing not worth it. If I recall correctly, you also had to...
Separate names with a comma.