Herm told me to put it on a table, in a vice, and use a phillips screwdriver to keep depressing the cylinder inside to get it bled. We will be...
http://www.earlycj5.net/forums/showthread.php?35840-throttle-hookup-on-f-134
That is perfect! Thank you!!
Please take some pics. I have the FSM, and the detail shot is lacking. I have all the parts too I think, but some pics would be awesome. You can...
There, I fixed it. Did you find anything?
Umm..no, I did find those while searching, hence the ask for help. They are not for the F134 4 cyl, nor are they in any way how the factory did...
Does anyone have any detailed pics of how their hand throttle attaches to the carb and linkage on a stock, factory 64ish cj5?
The part that needs to be shortened is the part that has the threads. Therefore you must take it apart, cut the threaded end, then either re-weld...
I thought about that, bu it is not possible to locate it anywhere but the correct position because the second part of the bracket loops over the...
Yes, he is quite the character!
I was directed to Herm for help. From Herm: It is all right to use the master cylinder to test fit for mounting purposes, but if you are...
Here is the uncut pin. I have one that I trimmed the tip off of as well. Luckily I had 2 of them, but can anyone tell me what part of this I am...
[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
I bought a dual cylinder master brake cylinder from Kaiser Willy, and am having some issues. I have the MC bolted into the correct place per the...
HaHa! Awesome. I found a whole assembly on ebay and broke down and bought it for $75. The cup is a hard piece to track down.
I am trying to locate a replacement cup for my original 1964 cj5 Donaldson oil bath air cleaner. I have found an antique tractor supply shop that...
Separate names with a comma.