I have found no valve adjustment procedures for my 75 CJ with an AMC 360. Are they adjustable?? Thank you Tim
I know how much we all like pictures, so I thought I would put some more of my son's recently completed PU
I am leasing a medium sized bottle for my Firepower. I think a 40# would do just fine. I think my 10 year lease on the bottle cost me about $47...
When I mounted my rollbar to the wheelwells, I used 1/2" thick aluminum plates cut 12" square. I then used West System epoxy to bond the plates to...
I have a Firepower 230 MIG. Does anyone know of a website that offers troubleshooting for these? I was using it when the wall plug shorted. The...
On an off road vehicle of fairly light weight, shackles are important. They keep the springs in alignment and allow fore and aft movement of the...
Eric, good to see you on here. You need to decide how "original" you want to keep it. You will find a small percentage of Jeep owners are happy...
I misunderstood. I didn't realize you had a leaf spring setup. When I got done with my build up on the CJ, I could hardly go down the road...
There are alot of differing views on a four link or three link/coil setup. First, there are alot of things to think about before bolting on new...
I've been doing alot of blasting lately and have been using black beauty and glass bead. Black beauty comes in different grit, and I would suggest...
Jhuey just put one on his 64 CJ5. He had some problems and can give you some good insight into what to watch out for. He is out of town for the...
Bead rollers are excellent for making strengthening creases in flat panels and flanging edges of patch panels. They do take some practice and...
Anything less than 3/8" would be prone to breakage. The head must be carefully drilled and tapped to accept the 3/8" studs. I did this on an AMC...
What's the future going to hold for the Jeep? How will it be driven? If you want a reliable, get-around-town vehicle stay with the 6. If you want...
It is illegal to sell just the VIN plate and title because there is no real vehicle. The CJ7 that I just got done building has a fiberglass body...
I cut the perches off a 75 waggie that seemed to be pretty tough. Remember, the perches are welded on the inside too. You have to do alot of...
I have a pair of seat from a 84 Camaro( cheap). I covered them with Wet Okole Neoprenes and they fit great. On the trail and road I feel high...
Separate names with a comma.