Funny story. After the project was put on hold (job change) and manually rotating it every now and then... its stuck again as I'm here ready to...
I'm to the point on my CJ5a that I'm thinking about the radiator. The old one pretty much disintegrated when I took it out. I'm loath to spend...
Stuck engine... UNSTUCK! After a month+ of having the cylinders full of Marvel and occasionally applying some pressure, yesterday I was...
I've seen it done on a large, complete , engine with a tripod of wooden poles (think not so small trees) boy scout style. That method seems pretty...
I had heard enough good things about Marvel to give it a go. I find the number of miracles attributed to it in marketing to be a bit of a...
Plugs out, snake oil in (Marvel, if I had it to do over, would probably have used high dollar penetrating oil).Starter out (the which looks nice,...
So, I've got my PI^HT^Hroject Jeep CJ5A F-134 wheel unjammed, tranny in neutral, clutch bunggied on, up on jack stands... Time to try to make the...
A little precision dowel and hammer action got it put back in line. Here is the deal... there is a floating pin between the cams in the...
I've been trying to reattach the rods and the control arms are stuck in an odd position... [img] Anyone have any ideas? Rolling it to loosen...
Whats a good source for and 11in kit? The parts don't have to be "new".
Hi guys (and gals)! So I'm pulling off the jammed front wheel of the family project CJ5A and stuff begins to issue forth ... [img] The...
I ended up ordering from Walck's after a call to make sure about the threading. I got a runaround from Napa (two different stores), a...
Thanks for the links/data. I was worried I've have no reference on putting it together. The shifter is still attached to the column... its just...
Going over everything, I appear to have ended up with a the wrong hose somehow. How well do hose barb connectors/hoses work? I'd expect those...
Hey Guys... I'm trying to figure out how to get the three on the tree on my (crazy rough shape) CJ5A project hooked back up. The two levers on...
I have an interesting problem. I'm replacing the oil lines on my F-134 out of a '64 CJ5A. The line that runs from behind the fuel pump to the...
Separate names with a comma.