Thanks for the input bkd and Dan. So I finished the clutch swap a few weeks ago and what a difference. At the suggestion of my brother in law's...
Update on the month long clutch replacement - followed the haynes manual for the torque on the flywheel to crankshaft bolts and ended up stripping...
Still waiting on a couple pieces for the clutch, so i decided to install the new motor mounts yesterday. used the ole' jack under the oil pan...
Struck out at Napa. continuing the search. might end up using standard grade 8 1/2"x20 x 1" bolts for the flywheel and buy the pressure plate...
Thanks! I'll give a check there tomorrow.
i am having trouble tracking down bolts for the flywheel and pressure plate cover from local hardware store. need 6 of each. i stripped a couple...
Here are some updated shots of the clutch replacement. [IMG] clutch cover plate [IMG] transmission is out [IMG] drive shafts, cross-member,...
Drove it for a bit with the weak clutch. Yesterday it went totally out. Started prepping to drop the transmission and take care of the clutch. If...
So, yesterday the clutch made a loud pop when depressed as i was starting the jeep. Now the pedal is slack for about 3/4 the way down. The clutch...
First CJ5 and just beginning restoration. 49,500 original miles. P/O used it infrequently on his farm and put in the aluminum valve cover. Most...
Picked up a 76 at the end of February and started restoring the beginning on March. Haven't done anything cosmetic, just engine work. [IMG]...
Separate names with a comma.