I meant the engine code. [img] I believe when I looked it up, that came out to be a 1977 232.
The guy I got it from is a pretty hard core Jeeper. And looking at this Jeep, nothing would surprise me. I know it's a 3 speed. Now if it's a...
Thanks for the info. Can I just use the I6 wiring harness plug and splice new wires on to it for the engine? At this point, I'm not trying to...
Forgive me if this has been discussed many times before, but I didn't seem to find anything in my searches. My 75 came with a 258, and had a 232...
I know this has been asked before, but I don't remember the exact answer. I've been looking for a smaller wheel for my 75 CJ and came across this...
Everyone I've talked too that runs Treadwrights has good things to say about them. I almost bought a set of my XJ, but after shipping, it was...
Pretty sweet.
What would get you the closest? I thought a GM or YJ column would be close.
I'm liking the rims. Looks like lots of good parts.
If it's your 68, it should be like 3 or 4 wires. Constant from the battery goes to the batt terminal. The accessory terminal gets power when you...
Wish you were closer.
If I'm going to buy a quality tub, I figure a new frame would be a good idea. Anyone have any thoughts on a throttledownkustoms frame?
I think the next step is to yank the tub and sheet metal and start measuring the frame.
It has the remains of a plow mount on the front, so I'm assuming the springs are bent from repeated ramming of snow banks to pack them down with a...
I'm also trying to figure out what's up with the front springs. Both are like this. If you look closely, you can see where the frame appears to...
I havn't looked into it that deeply, but I'm betting I'll find some cracks right around the firewall/rear spring hangers. The nose seems to point...
So if I used those measurements, it would work for a 72 - 75 CJ5?
Yeah, what always got me about the JP article was that they used a 59 (I think) CJ5, so I wasn't sure if that was the short nose or long nose.
Is this diagram correct for a 72 - 75 CJ5? [IMG]
When that happened in my XJ, I used nutcerts and new stainless steel bolts. The nutcerts are about a $1 a pop.
Separate names with a comma.