How did you attach the front of the fuel tank skid?
I decided aganst the cj-7 bumper and took 3 inches off the front of the frame. I also got rid of the yj shakle mounts for scratch built ones. Aslo...
[IMG] [IMG] [IMG] Here are the shackle angles they are omix yj one inch lift shackle with 2.5 yj lift springs [IMG] [IMG] [IMG] [IMG]
Well here are some updated pictures, first is the first time outside on its own tires. I did not have the rear shackles done thats why there is a...
Update! Took a little break form the project other than getting parts but now im back at it, I got a flywheel and my seats from a sahara tj. Got...
I have been super busy as of late, but work is slowly getting done, I ordered my other two springs and recived one like the next day. but the...
[IMG] [IMG] These are pics of the rear bumper. [IMG] Tranny tunnel and floor work. [IMG] A current over all view with a 2 in. body lift.
The shackle mounts will remain tacked untill the jeep is all mocked up and all weight is present for final welding. They are used skyjacker 2.5...
I have seen that knob before on a 83 Amc Spirit Gt, the car was all orginal un molested.
Here is an update, I have been working on my tranny crossmember and finished it up tonight I still have to drill the frame and make nut plates for...
That is exactly how my willys started out also, but the budget went away the more it looked like a jeep.:D Mine started out with a free 46 cj2a...
Ok so i took everyones advice and cut the old shackle mount off so how does this look so far is this a good shackle angle? [IMG] [IMG] And...
because of the parking light type in the grill I would say mid to late 46 willys cj2a. Does it have a clear title? take a magnet with you and look...
I was thinking to cut off the shackle mount and start new but I wanted to see what you guys thought. I am planning on lowering the motor about...
Heres an update I have the front leafs mocked up, went with 2.5 wide springs using cj7 mounts. The wheel base appears to be 81 inches [IMG] Motor...
It could be your long shackles causing the problem have someone turn the wheel and look at exactly whats moving.
Yes its really sad but like I said not my jeep, he wants to drive it on the street and take it to car shows.
I did accomplish putting a 4.0 in a 56 cj5 but the only thing left is the windshield hinges. The front fenders, hood and grill and frame are all...
nice work I like the body protection, what are the specs on the jeep (springs axles etc)
If i remeber right that is a coolent passage that is only used on one end of the motor and sense heads and gaskets are twins side for side the one...
Separate names with a comma.