I have a 74 CJ-5 mostly stock, but I believe after market springs. Front and rear both have 5 leafs. One spring side has 2 clips, and the other...
looks like you had some water in there.
my book says my 74 CJ-5 should have 7 leaves front, and 5 rear. Mine has 5 front and rear. 1 3/4 inch stock width. Did Jeep ever do this, or do I...
I used that foam in a can stuff. It hardens up and holds everything in place.
make sure you use rubber spacers between the tank mounts and the brackets. Otherwise the filler tube will rest on the frame and break loose at the...
I got one at OSH, but it's a California store. Other large hardware's should carry the same thing. It's a powdered bronze bushing 7/8 ID, 1" OD...
I have a 74 CJ-5 232. I installed a heater out of another 74 Cj junker. both are stock CJ's. It seems the heater core connection is 5/8, but the...
that's pretty much what I thought, but just checking with those who know. 74 CJ-5 232
is the same sending unit used for the light or the gauge, or is a different one required?
propane may do it. I would try it. You don't need a lot of color, if it turns red it will bend. I would let it air cool so it doesn't get brittle.
I would bet on the throwout bearing, Trans has to come out either way, so replace it anyway.
It closed almost all the way with a come-a-long, so I guess I'm in good shape. Pretty easy, why didn't I think of that? Now to weld overhead. I've...
Finally getting around to repairing a crack by the rear of the front spring perch. It is across the bottom, and extends about a quarter inch up...
My 74 cj5 has 1" rubber spacers between the trans crossmember and the frame. Would solid metal spacers be a better idea? It's being held up by...
Re: Advanced Adapters windsheild latches I used .25 inch aluminum bar stock for spacers.
Separate names with a comma.