The speedometer cable is a popular leak point too. A right-sized o-ring can stop that. As others have said, you need to give it a cleaning to...
[ATTACH] [ATTACH] [ATTACH] I have been working on things here and there, so I haven’t finished much, but I am making progress. I found 5 leaks in...
I think you misunderstand the issue. When in the vehicle the fill plug of the D18 sits below the level of the fill plug of the T14. No matter the...
Ugh. I was noticing pools of gear oil under it, rather than the usual drops, so I bit the bullet and pulled everything last night. I was pretty...
Adventures in Jeep land. I've been dialing in things over the past month, and we've been having a blast driving it around town. My big push to...
That would be running down the rear bearing retainer. Nothing obvious there or out the rear seal/shim pack. It probably is the pan gasket but...
The speedometer cable connection at the top of your photo is also a known leak point.
The speedometer cable is driven off the transfer case not the transmission. It will leak if you don’t block off. I’ve used the end of a cable...
Yup speedometer drive cable. Common leak point since there is no seal there. I install an o-ring to seal mine up.
Looks like the speedometer cable connection is at least one source of the leak.
Was too tired from yard projects yesterday to do anything on the Jeep except clean the work area and put tools away. It was getting to be such a...
Made a simple relocation bracket for the parking brake cable. The cable end has a 5/16" bolt and a tab that indexes in a hole next to it. I used...
More fiddly stuff today. Got several coats of paint applied today by ducking out to the shop on breaks and at lunch: [IMG] I started my evening...
Mostly spent money today for Tillamook trip prep. Don't have a spare for this Jeep. Both the tires and wheels are out of production. I had to...
Norcal69's Common Sense Build. Start at post number 211 I machined out the housing and installed a valve stem seal. Leak free since 2017 [IMG]
Rear output endplay is made with shims between the speedometer drive gear and outer bearing. You must remove the rear output yoke, outer bearing...
I picked up a rusty 1971 Jeepster Commando a few months ago (First Jeep) and intend to get it running well in stock condition, have fun with it...
Nice job.sorry I didn't get back to you, been busy. Just finished the seal on the Ren. II . You did exactly as I did. Good that you posted for...
While I had my transfer case out for the AA intermediate shaft install and t-18 to d-18 sealing issue, I decided to tackle my speedometer output...
Friday JEEP DAY! update: Hmmm... mixed bag today. We ran the engine to finally check out all the engine wiring. :( The oil pressure light in the...
Separate names with a comma.