1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need measurements

Discussion in 'Intermediate CJ-5/6/7/8' started by jdarg, Sep 12, 2011.

  1. Sep 12, 2011
    jdarg

    jdarg Member

    SE Wisconsin
    Joined:
    Jan 27, 2010
    Messages:
    93
    Does anyone have measurements on where the center of the rear brake lights, backup lights, and filler neck go on a '75 from the top/bottom/side of the tub? I'm working on putting a glass tub on mine but I don't have an OEM tub to measure from and I don't know anyone w/ an intermediate.

    Also what's the diameter of the grille cutouts for the turn/park lights and center point? PO took an OA torch to the stock cutouts and put rear tail lights from a semi there instead!

    Thanks,
    Dave
     
    Last edited: Sep 12, 2011
    jdarg, Sep 12, 2011
    #1
  2. Sep 13, 2011
    sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,892
    can give you some from my glass tub but may not be in stock locations...p.o. installed it
     
    sterlclan, Sep 13, 2011
    #2
  3. Sep 14, 2011
    deerslayer

    deerslayer New Member

    ELKIN N.C
    Joined:
    Nov 21, 2010
    Messages:
    14
    I have a stock 75 cj5 i will try to get that for ya
     
    deerslayer, Sep 14, 2011
    #3
  4. Sep 14, 2011
    DREDnot

    DREDnot Not new to JEEPS

    AZ
    Joined:
    Feb 7, 2010
    Messages:
    646
    7.5" in.
    5,9,and 15" down

    [​IMG]
     
    Last edited: Sep 14, 2011
    DREDnot, Sep 14, 2011
    #4
New Posts