1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Photo request- inner fender

Discussion in 'Early Jeep Restoration and Research' started by Howard Eisenhauer, Jul 18, 2011.

  1. Jul 18, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    I'm looking for a pic of an un-molested driver side inner fender- preferably '55-'56. The replacement I have has a lot of holes in it that I can't identify a use for. I'm pretty sure I've found the terminal block, horn & parking brake cable clamp but the rest have me scratching my head, some may be PO, some may be related to the fact it came off a '67.

    Anyone help me out?

    Thanks,

    H.
     
    Howard Eisenhauer, Jul 18, 2011
    #1
  2. Jul 18, 2011
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    This isn't off my '56, but it IS off another '56. It was given to me, and I passed it on to another member here. Hope these help ya some.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Rondog, Jul 18, 2011
    #2
  3. Jul 18, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    That'll do her Ron :)

    H.
     
    Howard Eisenhauer, Jul 18, 2011
    #3
  4. Jul 21, 2011
    mdmeltdown

    mdmeltdown Member

    Bossier City,...
    Joined:
    Feb 17, 2006
    Messages:
    792
    Did the one you bought have those 4 holes with welded on nuts on the back of the fender in a rectangle?

    I think that is something left over from the machine making the later fender too. I think it's for the later washer bottle
     
    mdmeltdown, Jul 21, 2011
    #4
  5. Jul 21, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    No, nothing like that. The only threaded holes were the two along the top for the horn. There were four in a rectangle below those down on the side but they looked like the PO had attached something there with sheet metal screws, I thought washer bottles went on the rear of the bulge...

    FWIW these came off a '67 & with one exception apart from those four everything else matches up with Ron's pics. The passenger side one had a few extra that were factory, there was a semi-triangular looking bracket for something but it had been pretty badly butchered anyhow.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    H.
     
    Howard Eisenhauer, Jul 21, 2011
    #5
  6. Jul 21, 2011
    mdmeltdown

    mdmeltdown Member

    Bossier City,...
    Joined:
    Feb 17, 2006
    Messages:
    792
    Oh, ok. I read into that too much. When you said replacement I thought you meant a repo one. I got repo ones and they had all kinds of weird holes in them
     
    mdmeltdown, Jul 21, 2011
    #6
  7. Jul 21, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    R-R-R-R-Reproduction parts?

    ON TONKA ?!?



    SIR! You have insulted the honour of my JEEP!

    I DEMAND SATISFACTION !!

    I await your response!!!

    H.chainsawguy
     
    Howard Eisenhauer, Jul 21, 2011
    #7
  8. Jul 22, 2011
    waynaferd

    waynaferd Hey, ya'll watch this!!

    That's Bangor,...
    Joined:
    Dec 30, 2010
    Messages:
    224
    Lmao
     
    waynaferd, Jul 22, 2011
    #8
  9. Aug 14, 2011
    jpman

    jpman New Member

    Ponca City, Oklahoma
    Joined:
    Jan 2, 2011
    Messages:
    13
    That's funny right there! Giggled for several minutes.R)
     
    jpman, Aug 14, 2011
    #9
New Posts